Diamond certificates, or certs, as they are known in the diamond industry, are often called the fifth C, in addition to the well-known 4Cs of diamond stones: carat weight, cut, color, and clarity.

This article will answer several popular questions about diamond certificates:

Why is buying a certified diamond better than buying a stone without a cert?

What are the most reputable certification systems in the United States and around the world, and how are they different from each other?

Are there different types of certificates and what are the key differences?

How can you be sure that a certificate corresponds to a specific diamond?

Whats the difference between certification and appraisal?

Why is buying a certified diamond better than buying a stone without a cert?

A diamond certificate is the evaluation by a third-party, not by either the diamond buyer or seller. Unfortunately, an 3rd party certification is necessary, as it would be easy for an unscrupulous jeweler to take advantage of an uninformed buyer and sell him or her a stone, which ostensibly has much better characteristics than it really does. There are a number of ways unsuspecting buyers might land a bad deal. If the diamond is not certified, there is a good chance you may be buying a stone that is one or more grades below stated values in terms of carat weight, color, clarity, or cut. Without a certificate, issued by a reputable agency, such as GIA, AGS, or EGL, or HRD, a buyer relies on a jewelers integrity that the diamonds4C parametersare accurate and not overstated.

A lack of a certificate may be a clue that the diamond has been enhanced and the jeweler knows an inspection would reveal the diamonds true condition, as well as indicate how the compromised diamond might erode. Internal fractures, inclusions, and excessively yellowish color, can be treated to visually improve the appearance of the stone. Such treatment deteriorates the overall quality and value of the stone. For example, diamond fractures can be filled with molten glass (a process known as Yehuda, named after the inventors name) to improve clarity by one or two grades. Or it can be worse: instead of molten glass, some jewelers use cheaper materials containing bromine to fill the fractures, which inevitably make the diamond darker over time, due to ultraviolet exposure. Some diamonds can be laser-treated to visually eliminate some of the inclusions. Laser treatment involves drilling tiny holes in the diamond to get to the inclusions. Needless to say, diamonds with drilled holes are worth less than comparable-grade diamonds that have no holes. Diamonds that are yellowish in color (color grades S through Z) can sometimes be pressure- and heat-treated to make them whiter (a process often referred to as HPHT, high-pressure and high-temperature). Such treatment also makes diamonds more fragile and brittle and, therefore, more prone to damage.

It is important to note that enhancement processes such as Yehuda, laser clarity enhancement, and HPHT can be useful for those who are looking to buy bigger diamonds for less money. If a diamond is inexpensive for its size due to yellowish color or if it contains a visible fracture, you can still buy such a diamond inexpensively (perhaps at a 30-50% discount compared to a naturally colorless or fractureless stone) and have it enhanced to improve its appearance. This enhancement would be significantly cheaper than buying a naturally higher grade diamond.

The problem, however, is that some jewelers make such enhancements and try to sell those diamonds without disclosing to buyers anything about the treatment.

To avoid buying a diamond lemon it is better to buy diamonds that are certified by reputable grading agencies.

Several well-known grading agencies in the United States and Europe have high reputations:

Diamond High Council (HRD, which is an abbreviation of the Dutch Hoge Raad voor Diamant)

International Confederation of Jewelry, Silverware, Diamonds, Pearls, and Stones (CIBJO)

GIA, based in the United States, is considered to be the industry standard and is the most widely used and trusted name in the diamond trade. AGS is well-known for its in-depth scientific research into diamond color grades. AGSs color grading is considered to be superior to GIAs by some jewelers. HRD, EGL, IGI, and especially CIBJO are not as well known in the United States as their American brethren, but certificate from any of these agencies is a solid proof (but not a guarantee) that you are not going to end up with a diamond lemon.

The key differences between the grading agencies are their diamond color and clarity grading systems, which might be somewhat difficult to compare against each other due to differences in scale. Over the years, however, some agencies made an effort to standardize their grading scales with that of GIA. Hence, be careful with older certificates, as the grades may not match current ones. For example, AGS modified its grading system in 1995. On this note, however, it is not advisable to buy diamonds with certs that are more than three years old since diamonds, like everything else, are prone to wear and tear and over time can chip, scratch, or crack, and a certificate more than three years old is not going to reflect the accumulated everyday damage.

The table below shows side-by-side four of the worlds most popular color grading systems: GIA, AGS, CIBJO, and HRD.

The short answer is yes, there are a few types of certificates issued by the grading agencies laboratories. All grading labs have different names for their certificates, which helps them differentiate their brands in the diamond market. GIA calls its certificates either a GIA Diamond Dossier or a GIA Diamond Report. AGS calls its certificates Diamond Quality Documents, Diamond Quality Reports, or Diamond Quality Analyses. All these certs are different in that they provide varying degrees of detail about a diamond.

For instance a GIA Diamond Dossier comes in two typeswith and without diamond cut details. All GIA Diamond Dossiers provide basic information on the diamonds 4Cs (carat weight, color, clarity, and two elements of the cut quality: polish and symmetry). Dossiers also specify the stones fluorescence and measurements. If the report comes with the cut information, it also provides detailed dimensions of the stone, such as table size, crown and pavilion angles, girdle thickness, etc.

GIA Diamond Reports, however, are slightly more detailed than Dossiers. They contain all the information included in the GIA Diamond Dossier plus a schematic of the stones inclusions (blemishes, inclusions, chips, feathers, etc.). This information may be useful for two reasons:

It allows the owner (and the jeweler) to link the diamond cert to the diamond itself by comparing internal inclusions in the diamond, seen under the 10x loupe with those specified in the GIA Diamond Report, without having to use a microscope to read the laser registry inscriptions, and

It indicates whether the diamond may need to be recertified when a 10x loupe examination confirms that some additional chips and scratches may have appeared on the stone that were not captured when the diamond certificate was created.

Some diamonds are laser engraved with a serial number on the girdle, to match the serial number on the certificate. However, professional jewelry thieves know that a repolish of the girdle can eliminate the engraved number. And, of course, the same option is available to an unscrupulous jeweler.

A better method to compare certification with a stone is to ask for a third-partys professional evaluation. No matter how similar two diamonds may be, they are likely to vary in weight, measurements, angles, and proportions. Some certificates do not carry this level of detail, which is one of the reasons diamond stones with certain certifications are a little more expensive than others with less detailed certs.

If your certification offers this information, seek out an independent appraiser, a GG (graduate gemologist). An appraiser who does not sell or buy diamonds has no vested interest in your purchase and is likely to give you the most honest and accurate appraisal.

If you cannot find an independent appraiser, go to a local jeweler and ask to make an appointment with an appraiser. Your odds of receiving a thorough, unhurried inspection improve with your method of approachdo not rush the jeweler, do not take the jewelers time away from potential other customers, expect to pay a fee, and be polite. If it improves your sense of accuracy, ask if you can have the evaluation without the GG viewing the certification. Then you at least know the GG did not simply copy what your cert says.

Many things can be manipulated, but each diamonds inclusions are unique. A certification that plots the diamonds inclusions is like checking the fingerprints on identical twinsyoull find the one you want.

A diamondscertificationis a scientific review of the rocks qualities: color, cut, clarity, and carat weight. It pertains to a loose diamond but will accompany the diamond even after a setting has been added. Certifications are conducted by several reputable groups. Certification does not assign a monetary value to a stone; it assigns grades on the diamonds key qualities.

Anappraisalassigns a monetary value to a stone. Appraisals on loose stones are more accurate than appraisals on mounted diamonds, since flaws are less likely to be hidden. The appraisal of a diamond can vary, depending on who is conducting the appraisal, how, why, and when. An appraisal can be rendered useless by fluctuating market conditions, but a diamonds certification is more steadfast. If a certified diamond has been mounted on a ring, it may need to be recertified to make sure normal everyday activity did not deteriorate the clarity of the stone by chipping or scratching the surface. Also, certain ring settings involve cutting into the stone or pounding on it, and recertification will provide an up-to-date evaluation.

For the most accurate appraisal, a third-party gemologist should be consulted. For a speculative guess at a particular diamonds worth, plug its certification information s search function to see the prices online retailers charge for similar diamonds. This is a good proxy for the retail value of the diamond, but not for a jewelers buying price. Jewelers buy diamonds from the public at wholesale prices, which, according to industry sources, are typically 60% or less of the retail price. So, if mdiamonds similar to your stone sell for about $5,000, it is likely a jeweler will offer you no more than $3,000 for it.

GIA, AGS, EGL and other diamond grading certificates